“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161942
Manufacturer Communication Number: 19NA094
Summary
This technical bulletin provides a procedure for installing screws to the center pillar upper trim panel structure on the affected sides to eliminate the ticking type noise.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | COLORADO | 2018-2019 |
GMC | CANYON | 2018-2019 |
SEOCONTENT-START
Bulletin No.: 19-NA-094
Date: June, 2019
Service Bulletin
TECHNICAL
Subject: Ticking Type Noise Heard from the Driver and/or Passenger Side Center Pillar Upper Trim Panel Structure On Bumpy Roads
Brand: | Model: | Model Year: | Breakpoint: | Engine: | Transmission: | |||
from | to | from | to | |||||
Chevrolet | Colorado (Crew Cab) | 2018 | 2019 | |||||
GMC | Canyon (Crew Cab) |
Involved Region or Country | North America and NA Export vehicles |
Condition | Some customers may comment on a ticking type noise heard coming from the driver and/ or passenger side center pillar upper trim panel structure, on bumpy roads. Though it can occur on either side of the vehicle, the noise is most commonly noted on the driver side. |
Cause | This condition may be caused when the adhesive bead is out of place contacting the center pillar upper trim panel structure outer reinforcement. |
Correction | Install two small screws into the center pillar upper trim panel structure on the affected sides to eliminate the ticking type noise following the procedure listed below. |
Service Procedure
- Remove the center upper trim panel. Refer to Center Pillar Upper Panel Replacement in SI.
5329884
- Tape up the edge of the headliner using maskingtape to protect against damage from the drill, as shown in the graphic above.
5330046
5330078
- For Driver’s side: From the left side upper corner of the clip square hole, measure left 24 mm (0.94 in) (1) and up 7 mm (0.27 in) (2) and with a paint pen mark both locations, as shown in the graphics above.
For Passenger’s side: From the left side upper corner of the clip square hole, measure left 42 mm (1.65 in) and up 9 mm (0.35 in) and with a paint pen mark both locations
5330164
5330277
- For Drivers’s side: From the right side upper corner of the clip square hole, measure right
42 mm (1.65 in) (3) and up 9 mm (0.35 in) (4) and with a paint pen mark both locations, as shown in the graphics above.
For Passenger side: From the right side upper corner of the clip square hole, measure right 24 mm (0.94 in) and up 7 mm (0.27 in) and with a paint pen mark both locations.
5329913
Important: BEFORE drilling, tape the 11/64 drill bit, as shown in the graphic above, so only 30 mm (1.18 in) of the bit is exposed to avoid drilling through additional layers.
5322317
- Drill two pilot holes through two layers of the metalusing a 11/64 drill bit, as shown in the graphic above.
5321035
- Expand the holes using a 7/32” drill bit (5.56 mm) to clearance size in the first layer of metal ONLY.
- Install the screws (M5) into the sheet metal.
Tighten
Tighten the screws to 4.5 N.m (40 lb. in)
Parts Information
Causal Part | Description | Part
Number |
Qty |
N/A* | BOLT / SCREW | 11610744 | 2 |
*For warranty transactions, DO NOT mark this/these parts as the Causal Part. Enter the word “Bulletin” in the Causal Part Description free-flow text field
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
Labor Operation | Description | Labor Time | |
1086038* | Installing Screws Into Center Pillar Upper Panels | 0.8 hrs. | |
Add | Install Screws Opposite Side | 0.6 hrs. | |
*This is a unique Labor Operation for Bulletin use only. |
Version | 2 |
Modified | Released May 09, 2019
Revised May 29, 2019 – Revising to update step 4 and add additional keywords. |
Additional Keywords: rattle, rattling, squeak, squeaky, squeaking, tick, ticking
SEOCONTENT-END
Bulletin No.: 19-NA-094
Date: June, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161942
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161942-9999.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- 135 Degree Split point tip design to help reduce walking
- High Speed Steel to be used in plastic, wood, and metal
- Tapered web design for extreme durability and resisting breakage
- Black and gold coating to help prevent rust and wear
- 3-Flats shank to reduce spin-out in the chuck
- DEWALT 21-pack black oxide twist drill bit set is ideal for general-purpose drilling materials like metal, hardwood, softwood, PVC and fiberglass
- Parabolic flute design increases chip ejection in metal and wood drilling applications
- Black oxide coating helps resist corrosion and increase durability, so your drill bits last longer
- 135° Split-point tips drill on contact and prevents walking on the hard surface you’re working on
- 31° Helix reduces over aggressiveness of true parabolic flute, making it ideal for drilling deep holes
- DEWALT drill bit set has connectable accessory storage system to optimize storage space
- Patented bit-bar design of the drill bits set allows easy removal of bits and customizable placement
- Clear lid of the Titanium Nitride Coated drill bit set allows you to easily see contents at glance
- Clip latch for secure closing
- Small Bulk Storage size fits inside the Small and Medium ToughCase plus (sold separately) - Ideal for organizing loose bits
- 【ALL-IN-ONE CONVENIENCE】- COMOWARE 246 pcs drill bit set includes a wide variety of bits for wood, metal, masonry drilling and screw driving. It is a must-have drill driver bit set in your home garage. Ideal for DIY project and home repair.
- 【CAPABILITY & DURABILITY】- Drill bits and screwdriver bits are made from superior HSS material for improved strength and durability. And the titanium finish and black oxide coating help the bits deliver higher drilling performance on wood and metal. Whether you are a mechanic or a DIY enthusiast, this drill bits combo kit will assist you in every application.
- 【WELL ORGANIZED CASE】- The 246 pcs drill bits sets come with a portable storage case with uncluttered layout. There is a sponge cushion inside to help prevent the drill bits from falling off or mixed use. And the blue labels with drill bit sizes on are designed for easy identification of the bit size.
- 【COMPLETE DRILL ACCESSORIES KIT】- Screwdriver bit set: 66 x 1" screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS black oxide twist drill bits, 21 x masonry drill bits, 4 x drill stoppers, 17 x brad point drill bits, 4 x spade drill bits, 1 x extension bit. Other accessories: 4 x hole saws, 1 x arbor adapter for hole saws, 1 x countersink, 1 x nail punch, 1 x bit holder.
- 【WARRANTY & GIFT IDEA】- We will gladly send you the replacement set if you are unhappy with any parts of this kit. The titanium drill bit set, brad point drill bit set, masonry drill bit set, spade drill bit set, hole saw kit and screwdriver bit set are sold separately in COMOWARE, which can be the good replacement or supplement to your toolbox. This drill driver bit kit combines the versatility and practicality that homeowners would appreciate. It is a nice gift-giving option as well.
- Connectable accessory storage system to optimize storage space of the drill bits set
- Patented bit-bar design of DEWALT bit set allows easy removal of bits and customizable placement
- Clear lid of the driver bit set allows you to easily see contents at glance
- Clip latch for secure closing, 55mm Double Ended Bits x 8, 88mm Power Bits: PH2 x 1, SL2 x 1
- Small Bulk Storage size fits inside the Small and Medium ToughCase+ (sold separately) - Ideal for organizing loose bits
- All-In-One: This comprehensive and high-quality drill bits and driver set includes HSS drills, wood drill bit set, masonry drill bits, screwdriver bits, countersinks, nut drivers, and a bit holder. It is ideal for DIY projects and household maintenance and repair. The variety of drill bits in this set can be used for wood, metal, concrete, and masonry drilling, as well as multiple driving and fastening applications.
- Premium Quality: Our drill bits are crafted from high-quality HSS material, ensuring exceptional strength and durability. Each bit is high-grade material made to resist damage.
- Portable & Easy Storage: AVID POWER drill bit set comes in a rugged and portable carrying case with clearly laid out molded placeholders, keeping all components organized and enabling effortless transportation. For enhanced usability, we have replaced the rigid direct injection molded plastic casing with more flexible alternatives to improve the overall durability of the set.
- Enhanced Compatibility: This universal drill accessory set is compatible with 3/8" and 1/4" impact drills and drivers, making it the perfect match for drill/driver, impact drivers, screwdrivers, and screw guns.
- Full Bit Set Includes: 11Pcs HSS Twist Drill Bits, 4Pcs Masonry Drill Bits, 4Pcs Drill Bits for wood, 16Pcs ScrewdriverBits, 4Pcs Sockets(6/8/10/13mm), 1Pc Countersink, 1Pc Driver Bit Holder.
- Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits
- 135 degree split point geometry for faster starts and reduced walking
- Impact rated: For use in 1/4 inches Hex impact drivers
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel
- HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
- Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
- Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.
- Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use.
- Organized Holder - A drill bits holder with size index is included in the set for easy storage and organizing. The drill bits set fits the majority of brands currently on the market.
- SCREWDRIVING AND DRILLING SET - 109 bits for a variety of household projects
- STEEL DRILL BITS - Common drill bit sizes ideal for wood, metal, plastic, and masonry
- SCREW DRIVING BITS - Variety of 1 in. and 2 in. screw driving bits
- RUGGED STORAGE - Durable, portable hard case with extra storage
- HOME AND DIY USE - Ideal for hanging pictures, installing fixtures, assembling furniture and other tasks around the house
- 100-piece drill and driver multi-bit set; ideal for metal, wood, plastic, masonry, and hole saws
- Includes 52 bits, 8 nut sockets, a magnetic bit holder, 4 hole saws, and more (scroll down the page for a full list of included pieces)
- Made of durable, wear-resistant alloy steel with quenching treatment
- Sturdy plastic case provides designated storage space and easy transport
Last update on 2024-04-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.