| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161946
Manufacturer Communication Number: 19NA098
Summary
This technical bulletin provides a procedure to add flocking tape the radiator mount sleeves to reduce the knocking noise caused by the excessive movement.
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CHEVROLET | EQUINOX | 2018-2019 |
| GMC | TERRAIN | 2018-2019 |
SEOCONTENT-START
Bulletin No.: 19-NA-098
Date: May, 2019
TECHNICAL
Subject: Knock in Front End Over Bumps or Turning Corners at Slow Speed
| Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||||
| from | to | from | to | ||||||
| Chevrolet | Equinox | 2018 | 2019 | ||||||
| Holden | Equinox | ||||||||
| GMC | Terrain | ||||||||
| Involved Region or Country | North America and N.A. Export Regions |
| Condition | Some customers may comment that a knocking noise can be heard from the front end of their car while driving over speed bumps or turning corners at low speed. |
| Cause | This condition may be caused by a clearance issue between the radiator housing and the radiator support sleeve.
⇒ Low speed movement may causes a twist load into the chassis. |
| Correction | 5326741
If the noise has been validated to be coming from the radiator mounts, installation of BSR tape can be applied to the sleeve. |
Service Procedure
Note: This bulletin provides some steps that require partial removal of component assemblies.
4572724
- Remove the front fascia (1). Refer to Front Bumper Fascia Replacement in SI.
5328546
- Remove the bolts the secure the hood latch to thecore support and position aside. Refer to Hood Primary and Secondary Latch Replacement in SI.
- Remove the two upper fascia support bracebolts (1). Refer to Front Bumper Fascia Center Support Replacement in SI.
- Remove the bolts that secure the radiatorbrackets (2) to the upper core support. Refer to Radiator Upper Bracket Replacement – Left and Right Side in SI.
- Remove the lower center brace bolt (3). Refer toFront Bumper Fascia Support Brace Replacement in SI.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
5330558
- Disconnect the Ambient Air Temperature Sensorelectrical connector (1).
- Disconnect the Intake Air (Boost) Pressure andTemperature Sensor electrical connector (2).
- Remove the fasteners that secure the Radiator AirLower Baffle to the radiator support. Refer to Radiator Air Lower Baffle Replacement in SI.
- Separate the Charge Air Cooler Outlet Air Tube (3) from the Charge Air Cooler (CAC). Refer to Charge Air Cooler Outlet Air Tube Replacement in SI.
- Remove the two bolts that secure the CAC to theradiator. Refer to Charge Air Cooler Replacement in SI.
- Using care, separate the CAC from the lowermounts and position aside.
- Raise the radiator enough to remove the radiatorsleeves.
5326741
- Apply the BSR tape or equivalent, to the sleeveensuring the edges are covered.
⇒ Using care, cut an estimated 1 inch x 1 inch piece of tape.
5328707
- Applying pressure, install the sleeves onto theradiator.
- Install the CAC. Refer to Charge Air Cooler Replacement in SI.
- Connect the Air Temperature and pressure sensorelectrical connector.
- Install the Radiator Air Lower Baffle fasteners tothe radiator support. Refer to Radiator Air Lower Baffle Replacement in SI.
- Lower the vehicle.
- Install the upper radiator brackets. Refer toRadiator Upper Bracket Replacement – Left and Right Side n SI.
- Install the outer bolts at the fascia support. Refer toFront Bumper Fascia Center Support Replacement in SI.
- Install the lower center support brace bolt. Refer toFront Bumper Fascia Support Brace Replacement in SI.
- Install the hood latch. Refer to Hood Primary and Secondary Latch Replacement in SI.
- Install the fascia. Refer to Front Bumper Fascia Replacement in SI.
Parts Information
| Causal Part | Description | Part Number | Qty |
| N/A | Tape, BSR Flocking | 92145740 (Holden) | 2 Pieces |
| KT13487 (N.A.)* | |||
| *The flocked anti-squeak tape may be ordered directly from Kent Industries by calling 1-888-YES-KENT. Additional information on this product may be found on their website at www.kent-automotive.com. Each 8” x 10” sheet of material is sufficient to repair approximately 40 vehicles. | |||
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time | |
| 4086958* | Add BSR Tape to Radiator Sleeves | 2.4 hr | |
| *This is a unique Labor Operation for Bulletin use only. | |||
| Version | 1 |
| Modified | Released May 09, 2019 |
SEOCONTENT-END
Bulletin No.: 19-NA-098
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161946
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161946-9999.pdf
To View or Download this Document Click Here
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
Yandood Black Flocking Adhesive Tape 4in x 35ft Projection Screen Felt Tape Border Ultra High Contrast Deep Black Felt Strips for Projector Screen Frame DIY
- 1.0mm thick flocking fabric, spunlace cloth backing, soft and comfortable hand feeling, firm flocking, no fluffing, giving you a noble projection screen
- Ultra-black absorbing suede, correct the projection screen, prevent the projection screen from overflowing, and give the screen a clear boundary
- Sturdy water-based environmentally friendly adhesive, strong adhesion, long-lasting without degumming, and the edges will not be warped. Comply with EU RoHS standards
- It is suitable for the borders of paint projection screens and white wall projections, and the DIY production of the borders of projection screens using stainless steel, wooden frame PVC, EVA， and other materials.
- Quality guarantee, if there is any quality problem or unsatisfied, you can get a full refund
Bestseller No. 2
Mesheshe 1 in x 16ft Self Adhesive Polyester Felt Tape, Thick Velvet Self-Stick Felt Strip, Flocking Felt Tape Roll for DIY, Projector Screen Felt Tape Border Absorbs Light, Brightens Image (Black)
- SIZE: 1 in x 16ft ; Can be cut into small pieces freely. Velvet Thickness: 1mm=0.039'' (Soft Warm Touch).
- Self adhesive nylon velvet flocking. Spunlace Nonwoven. Hand feel smooth, soft, colour bright, no odor, no obvious hand print, good rebound ability.The features of nylon flocking power: The flocking power glows with reflective quality when it is squeezed. It will go back to where it is with a hint of luster when it is fully exposed to air for 24 hours.
- These felt fabric sheetsare conveniently designed with an adhesive peel-off backing that sticks fast yet still comes off clean when it’s time to remove it. Eliminates the need for messy glues or other adhesives so you can better focus on the task at hand! Great for bulletin board backdrops, costumes, school projects and other classroom application.
- VERSATILE USES - Cut to any size & shape you want and use these felt fabric sheets for tons of fun & functional applications: DIY projects, arts & crafts, jewelry box & drawer lining, picture framing, backing & padding for furniture & coasters, wrapping paper, sound absorbtion and more!
- It is suitable for the borders of paint projection screens and white wall projections, and the DIY production of the borders of projection screens using stainless steel, wooden frame PVC, EVA， and other materials.
Bestseller No. 3
![JVCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black)](https://m.media-amazon.com/images/I/31Xc7l+jVYL._SL160_.jpg)
JVCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black)
- JVCC FLOCK-1 Flocking Tape is a black cotton flock non-woven product with an adhesive coating on one side and denser than traditional felt tape. This product will make a great replacement for velvet. Available in adhesive coins, dots, and 25-foot rolls ranging in sizes 1/2 inch to 4 inches wide.
- Flocking tape can be used for several non-entertainment related applications such as an abrasion-resistant substrate and sliding surface for noise reduction (anti-squeak) and dampening, basic surface separation (padding furniture feet), scratch prevention, and rattle noise reduction. It is often used in automobile dash interiors to keep parts from rubbing together and making noise.
- For the entertainment industry FLOCK-1 flocking tape can be easily applied around the edges of a wall screen to provide a definitive non-reflective border frame, which gives a more finished and professional appearance.
- Because JVCC FLOCK-1 Flocking Tape is non-reflective the border frame will provide an extra perception of brightness and will focus the viewer's attention to the screen.
- Carrier/Backing: non-woven acrylic flock. Adhesive: synthetic polymer. Release Liner: bleached Kraft paper. Thickness: 26 mils (carrier, adhesive, liner) 20 mils (carrier, adhesive) 6 mils (liner). Adhesion: 115 ounces per inch (to stainless steel test panel).
Bestseller No. 4
Tesa Black Fuzzy Fleece Interior Wire Loom Harness Tape for VW, Audi, Mercedes, BMW 19 mm X 15 Meters (5 Rolls)
- Used by Mercedes, BMW, Audi, VW and others
- Good abrasion resistance and noise damping
- Loom Harness tape for euro autos
SaleBestseller No. 5
ConClarity 2 in x 60 ft - Vibrancy Enhancing Projector Screen Felt Tape Border Deepest Black Ultra High Contrast Flocking for DIY Screen Borders Absorbs Light, Brightens Image & Stops Bleed
- CREATE A HUGE MASTERPIECE - UP TO 230 INCH SCREEN: Don’t settle for run-of-the-mill, often reflective adhesive borders – create the giant projector screen of your dreams (with plenty left over). 60 full feet of the deepest black, velvety tape for projector borders transforms your average DIY projector screen into what you’d expect to see aside a million dollar home theater projector. (2 inches wide, 60 feet long. A 10 foot by 17.7 foot border equals for a 230 inch screen.)
- ULTRA HIGH CONTRAST - We are using the deepest black, non-reflective projector tape material for the highest contrast-boosting experience on your projection screen. The difference in perception of contrast is day and night.
- PREMIUM IN EVERY WAY - BLACK VELOUR, NOT CHEAP FELT – Don’t ruin your project with cheaply made, cast-away felt tape – we sourced the best possible materials that we wanted to use for OUR OWN DIY screen projects. Our deep black velour projector border tape is clearly the best - delivering a significant POP to your images.
- STAYS STUCK ON ANY SURFACE – PERMANENT ADHESIVE BACKING - High quality adhesive backing tape projector felt permanently adheres to any surface for a lifetime (even in the hottest, most humid environments) making it ideal for fabrics of different weights and weaves, concrete, wood, metal, and more. Perfect use as anti-scratch furniture strips, shock absorbers, and sound insulation. Place it under the feet of your chairs, tables and beds!
- 100% SATISFACTION with YOUR DIY PROJECTOR PROJECTS – Your satisfaction is #1 in our book. We crafted projector screen border felt tape to compliment ANY DIY project screen project – raw fabric, projection paint, white walls, you name it. Click add to cart now, get it home, discover how easily it cuts to size, and adheres to your surface. You’ll love every minute or expect a full, prompt, no hassle refund for ANY reason.
Bestseller No. 6
ConClarity 4 in x 60 ft - Vibrancy Enhancing Projector Screen Felt Tape Border Deepest Black Ultra High Contrast Flocking for DIY Screen Borders Absorbs Light, Brightens Image & Stops Bleed
- CREATE A HUGE MASTERPIECE - UP TO 230 INCH SCREEN: Don’t settle for run-of-the-mill, often reflective adhesive borders – create the giant projector screen of your dreams (with plenty left over). 60 full feet of the deepest black, velvety tape for projector borders transforms your average DIY projector screen into what you’d expect to see aside a million dollar home theater projector. (4 inches wide, 60 feet long. A 5.25 foot by 9.75 foot border equals for a 230 inch screen.)
- THE DEEPEST BLACK - BEST ULTRA HIGH CONTRAST: Did you see the before and after pictures? The difference is day and night! That’s the high contrast-boosting experience to expect when you use our deepest black projector tape material – delivering a crisp, clear, high contrast image without bleed.
- PREMIUM IN EVERY WAY - BLACK VELOUR, NOT CHEAP FELT – Don’t ruin your project with cheaply made, cast-away felt tape – we sourced the best possible materials that we wanted to use for OUR OWN DIY screen projects. Our deep black velour projector border tape is clearly the best - delivering a significant POP to your images.
- STAYS STUCK ON ANY SURFACE – PERMANENT ADHESIVE BACKING - High quality adhesive backing tape projector felt permanently adheres to any surface for a lifetime (even in the hottest, most humid environments) making it ideal for fabrics of different weights and weaves, concrete, wood, metal, and more. Perfect use as anti-scratch furniture strips, shock absorbers, and sound insulation. Place it under the feet of your chairs, tables and beds!
- 100% SATISFACTION with YOUR DIY PROJECTOR PROJECTS – Your satisfaction is #1 in our book. We crafted projector screen border felt tape to compliment ANY DIY project screen project – raw fabric, projection paint, white walls, you name it. Click add to cart now, get it home, discover how easily it cuts to size, and adheres to your surface. You’ll love every minute or expect a full, prompt, no hassle refund for ANY reason.
Bestseller No. 7
ConClarity 1 in x 30 ft - Vibrancy Enhancing Projector Screen Felt Tape Border Deepest Black Ultra High Contrast Flocking for DIY Screen Borders Absorbs Light, Brightens Image & Stops Bleed
- CREATE A HUGE MASTERPIECE - UP TO 131 INCH SCREEN: Don’t settle for run-of-the-mill, often reflective adhesive borders – create the giant projector screen of your dreams (with plenty left over). 30 full feet of the deepest black, velvety tape for projector borders transforms your average DIY projector screen into what you’d expect to see aside a million dollar home theater projector. (1 inch wide, 30 feet long. A 5.25 foot by 9.75 foot border equals for a 131 inch screen.)
- THE DEEPEST BLACK - BEST ULTRA HIGH CONTRAST: Did you see the before and after pictures? The difference is day and night! That’s the high contrast-boosting experience to expect when you use our deepest black projector tape material – delivering a crisp, clear, high contrast image without bleed.
- PREMIUM IN EVERY WAY - BLACK VELOUR, NOT CHEAP FELT – Don’t ruin your project with cheaply made, cast-away felt tape – we sourced the best possible materials that we wanted to use for OUR OWN DIY screen projects. Our deep black velour projector border tape is clearly the best - delivering a significant POP to your images.
- STAYS STUCK ON ANY SURFACE – PERMANENT ADHESIVE BACKING - High quality adhesive backing tape projector felt permanently adheres to any surface for a lifetime (even in the hottest, most humid environments) making it ideal for fabrics of different weights and weaves, concrete, wood, metal, and more. Perfect use as anti-scratch furniture strips, shock absorbers, and sound insulation. Place it under the feet of your chairs, tables and beds!
- 100% SATISFACTION with YOUR DIY PROJECTOR PROJECTS – Your satisfaction is #1 in our book. We crafted projector screen border felt tape to compliment ANY DIY project screen project – raw fabric, projection paint, white walls, you name it. Click add to cart now, get it home, discover how easily it cuts to size, and adheres to your surface. You’ll love every minute or expect a full, prompt, no hassle refund for ANY reason.
Bestseller No. 8
![FindTape Polyester Felt Tape [1mm thick] (FELT-06): 1 in. x 75 ft. (Black)](https://m.media-amazon.com/images/I/41lv74iXCgL._SL160_.jpg)
FindTape Polyester Felt Tape [1mm thick] (FELT-06): 1 in. x 75 ft. (Black)
- Produced in the USA. To ensure getting high-grade U.S.-made material please ensure the seller is FindTape. FindTape FELT-06 Polyester Felt Tape, 1 millimeter thick, is synthetic needle-punched felt made from polyester fibers. On one side, it is felt; on the other side, adhesive.
- This tape is most frequently used to join and temporarily repair curtains, fabric and cloth drapes used in backdrops and for other general use vibration dampening. There are many other kinds of uses as well.
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
- Adhesive: synthetic rubber. Carrier/Backing: polyester needled felt. Release Liner: paper (reverse wound). Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse). Service/Operating Temperature: -30°F to 150°F. Application Temperature: 60°F (minimum). Standards Met: meets RoHS Directive 2011/65/EU. Core: 3 inch diameter
Bestseller No. 9
![FindTape Polyester Felt Tape [1mm thick] (FELT-06): 2 in. x 15 ft. (Black)](https://m.media-amazon.com/images/I/31r7SQNy1sL._SL160_.jpg)
FindTape Polyester Felt Tape [1mm thick] (FELT-06): 2 in. x 15 ft. (Black)
- Produced in the USA. To ensure getting high-grade U.S.-made material please ensure the seller is FindTape. FindTape FELT-06 Polyester Felt Tape, 1 millimeter thick, is synthetic needle-punched felt made from polyester fibers. On one side, it is felt; on the other side, adhesive.
- This tape is most frequently used to join and temporarily repair curtains, fabric and cloth drapes used in backdrops and for other general use vibration dampening. There are many other kinds of uses as well.
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
- Adhesive: synthetic rubber. Carrier/Backing: polyester needled felt. Release Liner: paper (reverse wound). Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse). Service/Operating Temperature: -30°F to 150°F. Application Temperature: 60°F (minimum). Standards Met: meets RoHS Directive 2011/65/EU. Core: 3 inch diameter
Bestseller No. 10
![FindTape Polyester Felt Tape [1mm thick] (FELT-06): 3/4 in. x 15 ft. (Black)](https://m.media-amazon.com/images/I/41pwnlPKJ8L._SL160_.jpg)
FindTape Polyester Felt Tape [1mm thick] (FELT-06): 3/4 in. x 15 ft. (Black)
- Produced in the USA. To ensure getting high-grade U.S.-made material please ensure the seller is FindTape. FindTape FELT-06 Polyester Felt Tape, 1 millimeter thick, is synthetic needle-punched felt made from polyester fibers. On one side, it is felt; on the other side, adhesive.
- This tape is most frequently used to join and temporarily repair curtains, fabric and cloth drapes used in backdrops and for other general use vibration dampening. There are many other kinds of uses as well.
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
- Adhesive: synthetic rubber. Carrier/Backing: polyester needled felt. Release Liner: paper (reverse wound). Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse). Service/Operating Temperature: -30°F to 150°F. Application Temperature: 60°F (minimum). Standards Met: meets RoHS Directive 2011/65/EU. Core: 3 inch diameter
Last update on 2024-04-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.